TECHNICAL GUIDELINES FOR ELECTRONIC POTTING SILICONE RUBBER.

1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.

2, Weight Ratio: part A: part B = 1:1

3, Deaeration the mixture under 0.08 MPa for 3 minutes.

4, The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.


Warm Tips for electronic potting silicone rubber:
1.The following material may hinder the curing of the product, So pls apply after summary experiment. When necessary, pls clean the application areas. Condensation silicone which not completely cured or organic tin compounds Sulphur, sulfide and sulfur rubber materials. Amine compounds as well as contains the amine materials. Pewters solder flux.
2. The electronic potting silicon erubber should be sealed storage.The mixture should be used up at once, avoid causing waste.

3. The electronic potting silicone rubber belongs to non-dangerous goods, but keep away from mouth and eyes.

4. When electronic potting silicone rubber gets stratified after a period of storage, Please mix the electronic potting silicone rubber evenly before using, it does not affect the performance.

If you have any questions pls feel free to contact Chris Yao
t