Max. turning diameter of railhead (mm)4000
Max. working height (mm) 2000
Max. weight of work-piece (t) 10/30
Table diameter (mm) 3200
Speed range of table (r/min) 2~63
Speed-step of table stepless
Max torque of table (KN•m) 63
Max cutting resistance of right tool post (T-Ram, CNC) (KN) 32
Max. cutting resistance of left tool post(T-Ram) (KN) 28
Travel of right tool post Horizontal (mm)2200
Travel of right tool post Vertical (T-Ram , CNC) (mm) 1000/1250/1400/1600
Travel of left tool post (Horizontal) (mm)2200
Travel of left tool post (Vertical) (T-Ram , CNC) (mm) 1000/1250/1400/1600
Feed range and speed-step of tool post (mm/min) 0.24~145 18 steps
Fast moving speed of tool post (mm/min)1550
Crossbeam fluctuation travel (mm) 1300/1700/2200
Crossbeam fluctuation speed (mm/min)350
Moving degrees limit of tool post (°)±30
Cutting section of tool bar (mm) 40×50
Crossbeam fluctuation motor power (AC) (KW) 7.5
Cutting feed two-speed motor power of left feeding-box (AC) (KW) 1.3/1.8
Power of main motor (AC) (KW) DC55
power of fast moving motor(KW) 2.2
Feed range of right tool post (CNC)( mm/min) 0~2000
Rapid traveling speed of right tool post（CNC）(mm/min) 4000
Table guide Hydrostatic
controller Siemens 802D or Optional
Position accuracy Test and evaluate accuracy according toGB/T17421.2-2000
Positional accuracy (mm) X Z 0.03/1000
Repeatable positional accuracy (mm) X Z 0.015/1000
Reverse positional accuracy (mm) X Z 0.010/1000
Working condition
Temperature range (°) 0~40°
Ambient humidity ≤85%
Power supply and voltage 380V±10%