ESKE Waterborne Epoxy is a two component epoxy resin based solvent free waterproofing compound, which is specially formulated to apply on damp surfaces, where solvent based epoxy fails. One part consists of epoxy resin and the other part with Hardener. The two components are converted into water base emulsion. Both the emulsion are mixed in equal proportions at the time of application, after mixing both the parts it can be thinned down with water.

Brief Details:
- Nature : Two Component
- Mixing Ratio : Part I : Part II : Water 1 : 1 : 1 parts by weight
- Consistency after mixing : Free flowing smooth paste
- Application time (pot life) :1 to 1 ½ hours
at 30ºC
- Drying time at 30 ºC : 8 to 10 hours
Surface dry : 2 – 3 hours
Hard dry : 22 - 24 hours
- Appearance & Colour : Off white, smooth film.
- Hardness, Toughness : Excellent
- Gloss : Semi Glossy
- Adhesion to controlled : Good
Damp surfaces
- Water Resistance : Excellent
- Chemical resistance soap water, : Excellent
Acid, alkali solutions, vegetable,
lubricating oils, salt water

Application

Cement- concrete water storage tanks, Damp walls (Interior), Toilet Sunk Portions, As an undercoat before applying ESKE COAT (Polyurethane coatings) & Vermiculite on roof terrace and external walls, Toilet and kitchen walls., Coating of Cellar Walls, Underground Tanks..

Outstanding Features

- Water dilutable.
- Being water based it penetrates in concrete / plaster surface, seals the porosity and network of fine cracks
- Reduces water permeability.
- Bonds strongly on cement concrete / mortar, plaster, asbestos sheet, etc surfaces
- Excellent resistance to +ve (hydrostatic) water pressure
-Non toxic

Packing: 10 kg, 50 kg containers