BT-AH series of slurry pump are designed for a wide range of erosive and/or corrosive applications. They are generally used for slurries containing high concentrations of erosive solids or where an extremely heavy duty is required. Some slurry pumps supplied by BT-AH are equivalent to Warwan brand AH series(AHR, AHM, HH), and some fluid end parts & frames are 100& interchangeable with WARMAN OEMs( including Frame type of B, C, D, E, R, ST, TU, S).

MAIN FEATURES:
*Double-casing structure;
*Cover plate and frame with the replaceable wear resistance metal liner or rubber liner made of natural rubber, polyurethane and synthetic rubber ( including impeller, volute liner, frame plate, throatbush);
*The pump body and pump casing is made of gray cast iron or wear resistant ductile iron according to the working pressure, with split structure and bolts connection;
*The frame plate with front edge are connected with the frame by bolts;
*The discharge side can be positioned at an interval of 45° by request and oriented to any eight positions to suit installations and applications;
*All the mentioned types, are horizontal direction and runs by clockwise from the shaft end.

Common types available:
1.5/1B
2/1.5B
3/2C
4/3C
4/3D
6/4D
6/4E
8/6E
8/6R
10/8ST
12/10ST
14/12ST
16/14TU

Please don’t hesitate to contact our sales if you are interested in any of our products.
Sales Manager
Att.: Jim
BETTER Drilling Fluid Equipment Industrial Limited