HY-218 Shoe mold Silicone Rubber

Usages of Shoe mold Silicone Rubber
HY-218 shoe mold silicone rubber is mainly used for shoe molds, sand casting, sole sampling, plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.

Data sheet of shoe mold silicone rubber
Model 218#
Appearance white
Mixing proportion of curing agent (%) 4-5%
Operating time (mins 25 0C ) 30-40
Curing time(hours 25 0C) 6-8
Hardness (A°) 18
Density ( g/cm 3 ) 1.08
Viscosity (mPas -25 0C) 18000
Tensile-strength(kgf /cm2 ) ≥18
Tear-strength (kgf /cm ) ≥8
Elongation-break(%) ≥ 314


Introductions To Shoe mold Silicone Rubber
Component A is a kind of white flowing liquid and component B is the curing agent. Take 100g of silicone rubber and add 3-5% curing agent for mixing. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. Then pour the liquid silicone rubber into the mold frame or onto the product to be duplicated.

Storage Method and Precautions of Shoe mold Silicone Rubber
The product, which is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the limited time. It can continue to be used in case of neither thickening nor deterioration

For further information, please feel free to contact Mandy