High Pressure Suspension Mill can be used for ultra-fine powder processing of 280 non-inflammable and non-explosive materials with Moth’s hardness below 9.3 and humidity below 8%, such as barite, limestone, pottery, scoria, in the works of mining, metallurgy, chemical, building materials. The particle size of finished product can be adjusted from 80-425 mesh. With the special device installed in the machine, it can produce 30-80 mesh coarse powder.
1. Compared with other mills, its capacity increases by 10%-20% under the same power condition, and compression force of rollers to material improve 800-1200kgf under the force of high-pressure spring.
2. All the materials with Moth’s hardness below 9.3 can be grinded and smashed.
3. Size of final product can be 0.613mm (30mesh) –0.033mm (425mesh). Some can reach the fineness of 0.013mm (1000 mesh).
4. High Pressure Suspension Mill meets the requirement of national dust-dump standard.
5. The separator can be adjusted very easily.
6. The multi-class seals are adopted to keep the grinding equipment tightly closed.
YGM65, YGM75, YGM85, YGM95, YGM130.